PicoBNC+™ Resistance Lead & Temperature Probe

PicoBNC+™ Resistance Lead & Temperature Probe

3m and 5m Permanent Ground Test Leads

PicoBNC+™ Resistance Lead

This is a new Lead and offers dynamic measurement of resistance which is a feature we are using within our EV guided tests. The PICO-TA432 offers a diode test function in addition to resistance measurements. The Lead has a total length of 2m in a Y configuration, with the non-PicoBNC+ ends being 1m in length and terminated in a 4mm
non-shrouded connection. The Lead contains an active current source and is intended to be used only on unpowered components and wires.

Attribute	Published Specification
PicoBNC+™ Resistance Lead
Model	PicoBNC+™ Resistance Test Lead
Phsyical
Combined length of lead and probe	2m
Electrical
Maximum voltage and CAT ratings	+/-30V ref PC Ground, not CAT rated
Hardware resolution	Range 200Ω with resolution of 0.1Ω
	Range 2kΩ with resolution of 1Ω
	Range 20kΩ with resolution of 10Ω
	Range 200kΩ with resolution of 100Ω
	Range 2MΩ with resolution of 1kΩ (PicoScope 7 only)
Hardware accuracy	Range 200Ω with accuracy of 2Ω
	Range 2kΩ with accuracy of 20Ω
	Range 20kΩ with accuracy of 200Ω
	Range 200kΩ with accuracy of 5kΩ
	Range 2MΩ with accuracy of 50kΩ (PicoScope 7 only)
Diode test	Sub 2V Voltage range for diode measurement
Scaling factor and ranges	Auto ranging for resistance starting HIGH Diode test is a single fixed range Default choice is resistance Auto range does not include the diode range
Calibration / zero offset requirements	On start up

PicoBNC+™ Wide-range Linear Temperature Probe

The PICO-TA395 is a linear temperature lead measuring in the range -40°C to 125°C to cover all common automotive and off-highway applications. The temperature sensor is enclosed in a 5mm stainless steel housing to provide contact and airflow measurement.

Typical Applications

- Engine temperature ~ typically +20°C to +120°C

- Heated seat temperatures ~ typically -10°C to +40°C

- Car heater temperatures ~ typically 0°C to +50°C

Attribute	Published Specification
PicoBNC+™ Temperature Probe
Model	PicoBNC+™ Linear Temperature Probe
Phsyical
Combined length of lead and probe	2.85m
Electrical
Maximum voltage and CAT ratings	+/-30V ref PC Ground, not CAT rated
Hardware resolution	0.5°C
Measuring units	°C and °F
IP rating	Sensor plus 1st meter of cable sealed to the equivalent of IP67
Operating temperature range	-50°C to +150°C
Scaling factor and ranges	-40°C to +125°C
Calibration / zero offset requirements	On start up