The Kit comprises the following 19 different sized sets of 4
universal breakout leads and a set of back-pinning probes:
14 Sets with flat blade connectors
4 Sets with round connectors
1 Set with square connectors
Right-angle back-pinning probes
with hard tip 0.7mm outer diameter with 300 mm extension lead
With all the connectivity options it provides, the kit improves your
chances of making a sound connection between the terminals of any
connector you might encounter.
Each breakout lead within each set of four is colored to match one
of the standard PicoScope channel inputs (i.e. blue, red, green or yellow)
to help you keep track of connections and channels.
The leads’ connectors are designed to be minimally small and easy for
you to manoeuvre into tight spaces, even when the terminals are close
together, yet they maintain sufficient rigidity to be
easily guided into position.
The individual breakout leads clip together into a single block for
ease of handling and help keep your cable routing neat and tidy when
you have several leads connected to adjacent terminals.
Typically, you use breakout leads to take circuit voltage measurements.
You can also use them to extend part of a circuit to improve the access
available to other probes, such as current clamps. However, when a connector
is particularly inaccessible (for example, when it cannot be sufficiently
separated without the removal of other components), you have the option
of using the right-angle back-pinning probes included in this set.